Zebra Temporary Line Marking Paint - 10L

Zebra Temporary Line Marking Paint

Bright. Colourful. Removable.

Zebra Temporary Line Marking Paint is a paint concentrate that comes in 10 litre containers. This paint is made in the UK and formulated to offer bright and colourful lines that can be removed when required or left to degrade over time. This temporary paint is available in a range of colours and it can be used on all kinds of different surfaces, including hard surfaces such as concrete and tarmac, grass surfaces, or artificial turf such as astro turf and 3G. This line marking paint can be applied easily using a Zebra line marking machine for an event or another short term purpose, and then removed when required using a brush and water or a pressure washer. It can be used for marking out temporary car parks, sports pitches, courts and running tracks and more.

Zebra Temporary Line Marking Paint is designed to be diluted with water to suit the application. It can be mixed to a ratio of 1:1 for many temporary applications, or even up to 6:1, allowing it to be removed same day.

Container Size: 10 Litres

Available Colours: White, yellow, red, blue, orange, green and black.

Application: For best results, apply using a Zebra line marking machine with the yellow or blue flat fan nozzle. The Zebra line marking system comprises the Zebra line marking machine, paint spray nozzles and the paint itself. They work together to provide consistent paint coverage over the surface and bright, crisp and colourful lines. The Zebra line marking system provides great value for money, as it uses less paint than traditional line marking systems or aerosol systems, but provides deep, rich and professional lines.

Directions For Use: Shake container thoroughly before use. Dilute to a ratio of up to 6:1, depending on application. On hard surfaces, brush away any debris and on artificial surfaces brush away any sand from the area to be marked. Apply using a Zebra Grass Line Marking Machine with the yellow or blue flat fan nozzle. Apply only when the surface is dry and frost free. Temperature of surface must not be below 2°C and must remain free from rain or other surface water for four hours following application. Remove using a pressure washer or brush & suitable cleaning agent.

Health & Safety: Non-hazardous, non-flammable, environmentally friendly. Observe normal hygiene precautions. Safety data sheet available on request for for full details.